About the Fair

The ABOLLO DRUM MOWERS is connected to the tractor three point suspension system and the movement is taken from the Pto shaft with 540 rpm and delivered to the drums through the belt pulley. With this system, the free swinging blades on the two drums rotating in opposite directions are opened by the effect of center force. is a meadow mower that mow the green feed plants (clover, grass plants, barley, oats, etc.) and barrel them to the field surface. To ensure easy transport, this model has a vertical lifting arm or a hydraulically controlled lifting system connected to the customer s request. Necessary prevention measures must be taken against damages that may arise due to some obstacles in the field. Thanks to the spring arrangement on the machine, the machine flexes according to the roughness of the field and it is the obstacle to damage on the machine.

The ABOLLO PROFESSIONAL ROTARY TILLERS cuts the stalks without the need of any other equipment after the harvest (Crop stubble, corn, sunflower, beet, cotton etc.), tips the soil and prepares the ideal seed bed. It will also refine large clods after the plow, and eliminates the roughness which occurred due to faulty tillage. In different models of rolls (threaded roll, tubular roll), it provide the leveling of the surface with the rolls and prepare the planting. Provides long-term conservation of soil structure. It mixes plant residues homogeneously to the soil. It facilitates soil preparation for the second crop. It saves time and fuel because no other equipment is used. Thanks to the detachable detonation legs attached to the front of the machine, prevents the tractor wheel trace in the ground.

Protection against erosion in all agricultural crops grown on/in ridges

The ABOLLO 4 ROWS POTATO PLANTER is a 4 line machine with 70 cm between rows and can be planted at 14 decare per hour. Because of the large seed storage, it is used more effectively due to factors such as going to less filling station and getting fewer maneuvers at the beginning of the field. The machine runs as standard in 70 cm rows. But thanks to the ability to move the planter on the main frame, the distance between rows can be reduced to a minimum of 65 cm and can be expanded to a maximum of 75 cm. All standard equipment parts of your machine are placed in accordance with all the settings in this range. Since the wing closure is a standard equipment consisting of main frame and connecting arms, it can be easily demounted and other closure systems can be mounted on the machine.

The ABOLLO POTATO HARVESTER The machine screening mechanism attached to the three point suspension system works by moving from the Pto shaft. Our machine reaches to 2.5 km / hour of harvesting speed in medium-balanced soil. The crops can be sown in 2 rows at a maximum distance of 75 cm between rows. It has a very good sinking capability with a blade system with a 26 ° steep angle. It also needs a very low pulling power. Alignment of the upper chassis at the right end of the blades is ensured by the surging of the mass of soil during the operation without clogging the machine.

The ABOLLO HAMMER MILL is mounted to tractor three-point connections system and takes its movement from the pto shaft. In the hammer mill , the crusher is a hammer system, the blades are made of steel and at the same time the blades can be used on four sides. The machine turns the blades with the centrifugal system and breaks the spindle by taking the revolution of the crusher section according to the operating speed of 540 rpm in the tractor Pto shaft. The sieving adjustment is done according to the desired grain. The machine has 4 different screen sizes. Care must be taken to ensure that the feeds desired to be milled are absolutely dry. Oily and moist feeds are not milled efficiently. You can easily feed all kinds of cereals (barley, wheat, corn, corncob, rye, broom, oat, cotton seed, alfalfa, sunflower and straw etc.) Thanks to the fan system, the filling of the grinded feed is easily done with sacks. Our model with electric motor is also in our production band.

The ABOLLO SINGLE ROWS MAIZE CHOPPER allows the tractor to be easily controlled during operation by taking part of the load on the tractor during operation thanks to the support wheel attached to the machine and connected to the 3 point suspension system. Power transmission is obtained via 2 shafts and gearboxes. The feeding unit consists of two drums and these drills have self-sharpening and bottom-cut lower knives. Thanks to these blades, a clean cutting operation is performed. There is a safety device against overloads on the machine. All of the feeder units are powered by a closed gearbox that does not require power. Through the design of the cutting mechanism of the silage machine, a regular silage is obtained. The fan with 12 cutting blades allows the corn to break down to a minimum of 5 mm. In particular, for the complete disintegration of dry corn grains, a cutting plate inside the cutting mechanism is available as standard. One of the most important factors for error-free and high quality silage is that the distance between sharp blades and blades and cutting plate is as narrow as possible. The grinding process is very easy and can be done in a short time thanks to the grinding device specially placed on the machine s cutting mechanism. Thanks to its powerful fan and fan pallets, the gearbox maize silage machine loads the silage quickly through the finished mooring platform. Thanks to the foldable chimney of the machine, it can easily pass through even the lowest places.

The ABOLLO TWO ROWS MAIZE CHOPPER has a working width of 1.25 mts and can cut - harvest - two rows at a time thanks to cutter and feeder drums. Thanks to its fold-back feature, it provides road opening on the field, reducing the number of turns in the field and preventing the corn from being crushed by the tractor on the field. Cutter and feeder drums cut corn and feed it to the feeder unit. The feeder unit feeds the disruptive blades on the fan at the right angle, ensuring the best quality disintegration. The fan with 12 cutter blades ensures that the corn breaks down to a minimum of 5 mm. There are two feeder rollers and two press rollers that allow the corn to go to the kneader. The printing drums are used to convey the corn plant s body and its cobs to the breaker fan with right angles, these drums are positioned horizontally in front of the kneader fan. A safety bolt, which can be easily accessed inside the machine, is installed to protect the feeding unit against stone and soil intake. Protect this nut against the intake of stone and soil by the feeding unit during working on difficult conditions. The wheel height can also be adjusted even during operation to prevent stone and soil ingestion while working in tough conditions. The chimney swing system can be easily controlled by the operator with the aid of a hydraulic arm through the tractor. The chimney has the length and height to be able to load on the trailer on the way back. There is also a chimney extension option that allows you to discharge to trucks and higher trailers. The grinding process can be done easily thanks to the knife sharpening system placed inside the machine. The machine height for the road position can be reduced by folding the upper chimney.

collects the mowed meadows and grasses with the fingers on the star wheels that takes movement with friction. In order to facilitate the bale and collecting of the forage crops, arrays the grasses in rows and provides easy picking. It could be mounted all types of tractors easily with the three point suspension connection system. Working position and road position could be easily switched unless getting off the tractor. Hay rakes are manufactured 2 types according to the working range as 8-10 array double row.

The ABOLLO HYDRAULIC SLIDING ROTARY TILLERS is a hydraulically shifted tillage machine that takes the movement from the pto connected to the tractor three point suspension system. It is specially made to use in fruit gardens and vineyards. It is actuated by the driver via hydraulic levers. By shifting the specially produced lift to the right and to the left, the pieces of soil between the tree and the vineyard are mixed, creating a loose environment and providing water and air balance. The opening of the sheet protection cover on the back side can be adjusted according to the structure of the soil and the desired quality of weeding could be obtained. It helps to increase the amount of humus in the soil by mixing the plants on the soil surface and organic debris to the soil. It does not require chemical struggle by destroying weeds.