About the Fair

The steering columns are safety items that are installed on the vehicles to drive the direction.

The brake calipers are safety items that are installed on the vehicles to reduce the speed or stop them.

Hydraulıc Jacks are part of the vehicle and its safety and have the purpose of lifting the truck in the event of tire puncture.

Various types of levers that are used to operate the manual transmission, or to control other devices, such as reversers, power take-offs, lifters, and others.

Telescopic gear rods are which are mounted on trucks with manual transmission and tilting cab.The telescopic gear tie rod is linked in one end to the gearshift lever (CORAM produces a full range of gear levers) and in the other end is connected to the gear selector coming out from the gearbox, in order to select the gears of the vehicle. When the truck is stopped, in case there is a need to access to the engine compartment, the cab is tilted, and at that time, to maintain the connection between the gear lever and the gearbox in the two ends, the tie rod extends telescopically through the extension of 3-4 elements. The release system of the telescopic part is done by a pneumatic or hydraulic cylinder, specially housed, which controls the opening when the cab is tilted.

In-vehicle cameras are a type of camera that records the image of the vehicle while it is driving and even allows you to monitor it remotely.

Clutch is the mechanical system that systematically transfers the thrust from the engine to the wheels in manual vehicles. Gas pedal; It is the part that transmits the first message to the engine to accelerate the vehicle. This part, found in both manual and automatic transmission vehicles, is the tool that determines the speed of a motor vehicle or manages the speed. The brake pedal, which is one of the most important parts of the brake system in motor vehicles, initiates the braking action. In a very simple definition, the chain of action required for the vehicle to slow down and stop begins with the driver pressing the brake pedal.

The main task of the front lighting is to illuminate the road and enable the driver to recognize possible obstacles and adapt to driving conditions. Front lighting consists of the following elements. 1-Part Lamps, 2-Dipped Beams, 3-High Beams, 4-Signal Lamps, 5-Fog Lamps Backlight System While the front lighting makes the road look good, the rear lighting above all provides the opportunity to show the vehicle s presence, to inform the driver s intentions to other drivers. The backlight consists of the following elements in particular. 1-Rear parking lamps, 2-Stop lamps, 3-Fog lamps, 4-Signal lamps, 5-Reversing lamps Interior Lighting System Interior lighting brings together the concepts of comfort and safety. Interior lighting consists of the following elements. 1-Ceiling lamps, 2-Reading lamps, 3-Floor and Door lightings, 4-Trunk lamps, 5-Glovebox lightings, 6-Make-up lamps, 7-Indicator lamps

The joystick arm is a physical controller that allows you to control the machine.